Vizio TV Blinking Logo Won’t Turn On (Fix It Now)

Vizio TV blinking logo failing to turn on is a typical problem that sometimes occurs with televisions. Most people find it difficult to cite the exact cause of their televisions and do not know how to solve it. So it would help if you did not worry about the grounds of the blinking logo failing to turn on.

In most cases, the Vizio television blinking logo failing to turn on results from the faults with the cables, the backlight of the TV, sometimes the signal strength is poor and may be issued with the television display mode. The TV logo will flash when the firmware is corrupt, and the power light will blink when an update is required or if you are using a foreign remote.

The issues with the television blinking logo have easy solutions that I will describe briefly in the article below. There will also be the frequently asked questions in the paper and, lastly, the conclusion.

How to fix a Vizio TV blinking logo that won’t turn on?

1. Hard Reset of the TVvizio tv blinking logo won't turn on

A hard reset will clear any internal memory, including minor malfunctions, but it will not erase your settings or remove any downloaded content. You can do this with the following steps.

  1. Turn off your TV and all connected devices.
  2. Unplug the TV from the power.
  3. Press the power button on the TV for 30 seconds.
  4. Keep the TV unplugged for another 10 minutes.
  5. Plug the TV back in and turn it on.

2. Factory ResetFactory Reset

A factory reset will erase all saved preferences and delete any downloaded content on your TV. Therefore, you should only do this if you have tried everything else. Below are the steps involved in a factory reset.

1) Select the menu option in the remote.

2) Search for the System, then Reset & Admin.

3) Select ‘Reset TV to Factory Defaults.

4) Enter your TV’s passcode or the default code, ‘0000’.

5) Select ‘Reset’ to confirm the factory reset.

6) Wait for the TV to turn off and back on again.

3. Re-Insert All Connections

The easiest way you could fix this is by unplugging all connections to the TV and re-inserting them. One of the cables may be loose, causing the video signal to cut in and out. Make sure you are pushing the connections into the sockets.

4. Check the Cable and Port

It may also be that your cable is not working correctly. Firstly, you should try the line in a different port. That particular port may be malfunctioning. If you are using an HDMI cable, try a different one to see if your original cable was faulty. You should make sure that you are using at least HDMI 2.0 as this will allow more information to pass through to the TV. Sometimes the screen is flickering because the TV is replacing the lost data with a blank screen.

5. Disable Advanced Video SettingsDisable Advanced Video Settings

Many people have had issues with the TV’s Advanced Video Settings. These designs improve your TV display, but sometimes they can inhibit the video if the signal is not compatible. You can find these using the pathway below.

Menu > Advanced Video

Try disabling all of the following settings. If you prefer, you can try to isolate if one of these settings is causing the problem so that you can keep the others enabled.

6. Poor Cable Signal

A poor signal from your satellite TV will also cause a black flicker on your screen. You should align your satellite dish to ensure you are receiving the strongest signal possible. Then you can unplug your set-top box, wait a few minutes and then plug it back in to perform a hard reset.

7. Using the Vizio Remote

Using a remote other than the Vizio remote, such as an Xfinity remote, will cause the light to flash. It is likely a bug in the firmware that may be in the process of being fixed.

Bugs are usually fixable in the latest firmware update on your TV. If you are unsure if your firmware is up to date, you can check this manually, which I will detail below. In the meantime, using the Vizio remote should stop the light from blinking.

8. Update the Firmware on Your TVUpdate the Firmware on Your TV

Your TV should automatically update its firmware when a new update is available. If you are aware of a new update but the TV has not downloaded it, you can edit the firmware manually using the method below.

Menu > System > Check for Updates

If an update is available, you will have prompts to confirm that you want to install it. Keep in mind that some companies release their updates over one or two weeks, so the update may not be available in your region yet.

Some people have found that the power light will also blink if an app needs to update or was attempting to update. If this is the issue, you should ensure all apps on the TV are up to date as well. You can update apps using the steps below.

  1. Highlight the app you want to update.
  2. Press the yellow button on your Vizio remote.
  3. If an update is available, select ‘Update’.
  4. Turn the TV on. The logo may flash again.
  5. Wait for the flashing to stop after about two minutes. The logo should turn orange.
  6. Turn the TV on again.

The reset should allow the TV to discharge any unnecessary internal memory, including corrupted data. It will then need the time to reboot its operating System, which is why the logo will still flash for a few minutes after you have performed the hard reset.

Frequently asked questions:

  • What are the other problems that Vizio TV faces?

The Vizio television has issues with the blinking logo that fails to turn on when starting the tv. There are other problems that the television encounters when using it as the production of unusual sounds indicates that the TV has some issues that need fixing. The major causes of such problems are the fan whose parts like the blades encounter failures or maybe with the motor.

Conclusion

The article contains all the possible solutions to the Vizio TV blinking logo that fails to turn on. Some of the answers have steps to follow when troubleshooting your television to avoid a few errors accompanying the fixing process.

Therefore, follow the solutions carefully to help reduce the problems with your television. Failure to correct the mistakes can cause the television to fail to function. Remember to follow the manufacturer’s instructions when fixing the problem.

Leave a Comment