Most Common “X” Reason for That Your TV Won’t Turn On

If you own a TV, you’ve probably had a problem with it not starting. It’s happened to us all. You sit down at the seat, ready to watch or play your favourite game, but nothing occurs when you turn on your television. The screen remains black.

Troubleshooting a television that won’t switch on might be a difficult task. In some cases, the tv may be operational but only display a black screen to the user. The key is to look for the red standby light, a small red light just at the edge of the TV that you can aim at with the remote. When the television is not in use, the red reserve light is illuminated.

The difficulties that are the root cause of this and their answers can range from simple to quite sophisticated. This article discusses the most prevalent reasons for this problem and what you may do to resolve it. With a little time and effort, you should be able to diagnose and resolve the majority of these issues on your own in the majority of instances. However, in rare circumstances, you may be required to take it to a specialist for examination and diagnosis.

“X” Reason for That Your TV Won’t Turn On

1. The displaytv won't turn on

Check that your television’s display is turned on and that the lights are functioning properly. Even if it sounds like it’s starting up and the lights are on, if your TV’s display is either off or illuminated by an orange light, it could simply be a display problem, which is far simpler to solve.

First, if you have another television, I would recommend connecting the screen to it. If it does come on, it could be a simple driver issue with your television or a problem with your graphics hardware. To see if you have a picture, try booting your TV into safe mode. You have a driver problem if you do this. You should be able to resolve the issue by just re-installing the driver. 

You might have to experiment with a different television display if you don’t have one already. A graphics hardware failure could be the cause of a lack of visual output when using a separate monitor. Check to see if replacing the graphics card or even using a different cable may help to resolve the problem.

2. Lack of power at the sourceLack of power at the source

This is another obvious problem that is frequently overlooked: the outlet into which your television is plugged. Premium televisions consume a significant amount of electricity, and if you overload the circuit where the TV is connected with some other gadgets, the circuit breaker might trip. In addition, you could be experiencing an issue with the outlet itself or the wiring leading to the outlet, which is something you shouldn’t ignore.

Determine whether or not your circuit breaker has failed. Then try your television again after reducing the load on the circuit by unplugging any other devices. The fact that it loads indicates that the problem exists. Try plugging something other than the TV into the outlet to see if the breaker has not been tripped yet. If this is the case, you may be certain that the problem lies with the television. Otherwise, you should probably get an electrician to inspect the outlet and wiring to be on the safe side.

3. Check your power strip

Some power strips are equipped with a reset button, whereas others are devoid of such a feature. If it does, try pressing the button again and then restarting your television set. It will not work unless you first turn it off and then unhook it from the wall. Wait around 20 seconds before plugging it back in and turning it on. Then turn on your television. If this is the source of the problem, your television will turn back on. If this is the case, it is time to experiment with some of the other possibilities on this list.

4. Check your external connections

The cause of your television not turning on could be due to a loose connection, which is another simple problem that is all too often neglected. These connections are frequently with the power cords themselves. Still, if you have any other peripherals connected, they could also cause issues if they are not properly secured or tightened down. This most frequently occurs when you are shifting your feet underneath the desk and moving items about to clean the office space.

5. Unplugged peripheralsUnplugged peripherals

When it comes to peripherals, it is possible for either of these devices to malfunction. Because they are connected to your television by USB and other connectors, they have the potential to cause the television to fail to boot in extreme circumstances.

When you see this, unplug all of your peripherals from the power source and the television. Then restart your television and see if it works. If one of these is the source of the problem, your television will turn on. If it does begin, you must first identify the peripheral causing the problem before proceeding and that the only way to do so is through logical deduction.

Connect them all, and then turn down your television. Unplug them one at a time till your television turns on. This will inform you which component is causing the problem and which one needs to be replaced.

6. The internal connectionsThe internal connections

If none of the steps above successfully resolves your issue, it is time to open the case and examine all of the internal connections. Over time, they might become loosened and cause issues with the power supply to your television.

To begin, unplug your television from the wall and remove it from its casing. First and foremost, make a connection between the power source and the motherboard. Firmly press on them to ensure that they are securely secured down and attached. Check the connections for the hard drive or any devices, including DVD drives connected to a power supply from the inside of the TV, after verifying the connection for the hard drive.

If everything appears to be in order, close the casing and attach your television to give it another shot. If one of these connections was the source of the problem, your television should be able to load without issue. The most extreme scenario would be to attempt disconnecting everything inside the TV (except powering the motherboard) and seeing if your television boots up as a result. This will eliminate any errant hardware attached internally to your television and is causing it to malfunction.

7. Stuck memoryStuck memory

This will not prevent the TV from turning on most of the time, but it will keep it from starting. However, I have witnessed it prevent a PC from booting up. On your television, the memory sticks ought to be easily accessible. Remove the sticks from the television by pulling the clips on both ends of each stick and pulling them out of the TV. If they are dusty, clean them off and replace them with new ones.

If it doesn’t work, you could want to experiment with using fewer memory sticks or perhaps replacing the memory entirely. This will rule out the possibility that you have a bad stick of memory, which could be the source of your boot troubles.

8. Old or damaged power supply

This is among the most prevalent problems associated with a TV that would not power on. In the broad scheme of things, it’s not that tough to replicate, but you must be certain that you obtain the correct one, one that will offer the necessary energy requirements for your television. What you’ll need will be determined primarily by the hardware you already have.

9. Motherboard failure

The motherboard is one of the most likely reasons for a TV that won’t switch on, and it’s also one of the most difficult and expensive to fix. When the motherboard malfunctions, the television frequently fails to turn on. It may turn on in some circumstances, but it will not boot. In some circumstances, you will be given no power at all. Because the symptoms are similar to those of a power supply, troubleshooting this one can be difficult. In some circumstances, you’ll have to employ the elimination process to figure out what’s wrong.

10. Other problems

In some circumstances, more troubleshooting is required. Common causes I’ve observed in my years of TV repair if you’ve done everything and it still doesn’t work, call a specialist. Their chances of testing and understanding Even if it can be repaired, it may need to be replaced. So, read our TV suggestions and pick one you like.

Read also our another article of: My TV Says No Signal Input When Connected To Hdmi


In conclusion, power strips can malfunction from time to time. When you have a brownout or lose power due to bad weather, they may not be able to reset properly. If they are not properly reset, they will not properly send the power to the television, which will not turn on. Everything will appear to be in order, yet nothing will function properly. Be keen when handling cords.

As mentioned, many of these issues can be resolved by the average person without the assistance of a professional. If you are not confident in your ability to do these repairs, please seek assistance from someone. We don’t want to aggravate the situation. To be sure, if you can do it alone, there is a strong possibility that you will be able to get it mended much more quickly than if you take it to a repair shop.

Leave a Comment