An HDMI connection is the best way to enjoy high-quality videos or pictures right from your sofa set. Of course, we all wish to have impressive experiences with our electronics, but sometimes they encounter challenges. Since Televisions are artificial, you should be ready to experience minor issues like “No signal” when connected via HDMI.
Are you worried about such a problem? Oh No! It’s a minor one, and you can easily tackle it. But, of course, several factors like heavy winds or rain at your place can lead to such a challenge with your TV.
Count yourself lucky because you are reading this article. We might not know the exact issue with your TV, but we shall discuss the suspects. What else can you sacrifice, if not a little bit of your time? So take a cup of coffee and allow me to navigate you through this article.
The meaning of the “No signal” issue
Some folks ask themselves questions like, “what is this No Signal am experiencing with my TV?” You will get all the answers in this article, plus how to pin the problem down. But, first, you have to understand
If you experience a “No signal” challenge with your TV even after connecting it to the right input like a cable box, the issue could arise from network reception. In short, this problem implies that your TV isn’t receiving any signal from the chosen source.
The following solutions vary based on the problem type being portrayed by your Television. Therefore, in the end, you should be in a position to use all or choose one to work on your TV’s No Signal problem.
Troubleshooting “No signal” problem
Solution #1: Allow the HDMI connectivity
Whenever you intend to connect any of your mobile devices to the Television, you should first make sure the HDMI connectivity is permitted on your device. You can easily achieve this by going to the settings and choose Display Entries and then tap on the HDMI connection.
Enable the HDMI connection if it’s disabled. If this doesn’t work, you advance to the next fix.
Solution #2: Switching the Input Source
This should be your first attempt whenever you experience a no signal challenge with your Television. It’s straightforward since you only have to press the Source/Input button from the remote. There are several input options, and you should toggle through the HDMI source. In situations where you have several HDMI ports, choose the right one.
Solution #3: Try plug out-plug in trick
Under this step, you are required to unplug the power cord of your TV for something like 10 seconds and then plug it in again. You may realize that the “No signal” display has disappeared. It’s just as simple as that, and if you’re lucky, the problem will be solved.
Solution #4: Updating the Drivers
Sometimes your TV may display no signal after connecting it to HDMI due to failed graphic and chipset drivers. The best thing to do is, therefore, to make sure they are up-to-date. Some experts would prefer using the Driver Easy app to update the drivers automatically. The software will also search for suitable drivers that can fit your TV.
Solution #5: Disconnecting available HDMI inputs then rejoin them back, but one at a time
Sometimes many HDMI sources could be the reason your TV portrays the “No Signal” problem. This fix will only work if you have several HDMI inputs connected to your Television. Follow this simple guide;
Step 1: Detach all HDMI cables from the TV.
Step 2: Disconnect the power cord from your TV for not less than 10 minutes.
Step 3: Reconnect the power cord to the TV.
Step 4: Connect your device to a correct HDMI port in the TV and power on your device.
However, if you only have one HDMI source connection, advance to the next solution.
Solution #6: Factory reset
When did you last attempt factory resetting your Television? Well, if it is now some months down the line, try performing this solution. This fix should come last after all the above options have failed. However, if this is the problem with your device, I am sure the fix will help.
You might be interested to read our another article of: How To Hook Up Directv Box To TV Without Hdmi
- Why is the input of my HDMI problematic?
Hardware issues remain the best culprits that should be held responsible if your HDMI source isn’t working properly. This problem mostly arises within the HDMI port(s), your devices, or the cable. With such an issue, replacing the entire HDMI cable could be the best solution in the town. Doing so will pin down any issue that could be hindering the normalcy of your HDMI input.
- Why do I see “No Input Connection” on my TV?
Experiencing such a problem implies that your Television is connected to the wrong source. Resolving the issue is straightforward as you only have to use the TV’s remote control to choose the correct input. In addition, some TVs are equipped with a handy button labeled source/input, and some may even have a series of buttons for every source type. This enhances ease of use.
From our discussion, weather constraints like heavy snowfall or rain at your place may affect the normal performance of your TV. That’s when the TV will start displaying “No signal” on the screen after being connected to HDMI. You have to power off your electronics for a few seconds to allow signal recuperation for such issues. Doing so is necessary because digital satellite dishes are equipped so that they can withstand harsh weather conditions.
However, if you are sure that you are not experiencing this challenge due to faulty TV hardware, then chances could be due to its several connections. What we have done above is to provide you with a handy guide for a smooth troubleshooting process. The solutions are easy to follow and initiate. No need to spend much on such Television; use our guide.