You want to connect your projector to the ceiling, but there are no studs. Well, you don’t have to worry because this article covers a wide range of information to help you do that. Choosing this way of projector installation is always reserved for unique situations.
This type of installation normally works well when your screen features a massive black border on its top, and it’s adjustable. Mounting a projector on the ceiling can be a suitable way to maximize the space in your house as well as preventing the device from regular and unnecessary change of location. Have a look at this report for more information.
Complete guide to mount a projector on the ceiling without studs
Note: You only have to use the following steps to install the projector on the ceiling after setting up its screen.
Step 1: Assembling necessary tools and materials
Some of the common items you don’t have to miss include;
- Eye Bolt screws or Toggle bolts
- Snap links
- Wall-hanging L brackets
- Ceiling hooks
- A measuring tape
- A screwdriver
- An extra-strong magnet or actual stud finder
- A marker
Step 2: Finding the best and reliable Viewing Angle
To reach at a suitable viewing angle, you have to implement a certain formula. But, this step is very simple after you’ve already installed the screen on the wall. However, it’s advisable to locate your projector on almost a parallel midsection of its screen.
Step 3: Setting up the ceiling
Now it’s time to set up the ceiling and install your projector. But, before performing this job, you are supposed to inspect the ceiling since it doesn’t have studs.
Step 4: Make some necessary holes
Now after finding a suitable and a polite position to mount your projector to the ceiling, try to use a machine like a power drill and make necessary holes on your ceiling. What you need to ensure is that the place has remarkable concrete to eliminate accident chances.
Sometimes it’s even advisable to use an extended wood panel and join the two joists on the ceiling. Don’t hesitate to mount the bracket on your favorite area. Under this step, you are required to use either Toggle bolts or eyebolt screws. But you need to ensure that these bolts or screws can support the weight of your projector screen to prevent accidental crashing.
Using toggle bolts is a bit challenging, but the recommendable way for the safety of your projector.
- Drill a big enough hole in the ceiling to fit the folded wings of the toggle bolt.
- Cut off the wings from the available toggle bolt.
- Access the ceiling hook and then deep into the toggle bolts in the screw holes.
- Now twist and fit the wings back, ensuring you screw at least three threads from its tip.
- Bend the wind and insert it in the ceiling’s hole.
- Grab your screwdriver and secure the ceiling hook and the toggle bolt to the ceiling. You are now free to connect the projector screen to your hook.
Step 5: Connect the Mounting Bracket to your projector
Under this step, you are supposed to attach the bracket to the project; thank God nowadays projectors come with their mounting brackets. But, in situations where the projector doesn’t feature a mounting bracket, it’s advisable to opt for study and high-quality mount.
A proper mount will make sure that your projector will not be deflected from a setup position, even after several years of usage. Besides, such a bracket will ensure your projector will not fall down. However, sometimes it’s also advisable to invest in additional suspended kit for the mount to take care of heavy weight.
It’s now time to mount your projector on the mounting bracket; it’s always advisable to rely on the user manual instructions. You need to be much careful when attaching the projector to the bracket to ensure that it’s in line with the lens. Adequately screw the mount until the whole bracket is ideally connected to your projector.
It’s now time to mount the bracket on the ceiling with the aid of either toggle bolts or eye bolt screws. Simply, insert the screws on the previously drilled holes and tighten them to properly hold the mounting bracket on the position. You are then supposed to join the two brackets properly, and confirm whether your projector is steady or not.
Step 6: Hooking the cables
The last thing to do will be to attach the necessary cables to and fro your projector. These cables allow you to utilize a power extension in situations where the power source is a bit far from your projector. For display cables, it’s advisable to opt for long HDMI cables to enhance neatness to the entire setup.
Occasionally, you may implement the use of decorative trucking to help you hide the cords and offer a nice looking environment. Additionally, choosing this way spares the wires from any sort of wear and tear, reducing any kind of electrical mishap. Besides from covers, some experts also recommend using cord and fastener supports that are readily available in various local stores.
Frequently asked questions:
- What is the distance to mount a projector?
The height of your EXACT lens may range between 0-9.36” above the screen top. It’s therefore advisable to shoot approximately 5-inch above the screen top. On the other hand, the lens center should be something like 43 inches from the ceiling.
- Can I mount any projector to the ceiling?
The mounting plates of a projector are designed to match a specific projector’s mounting holes. This varies based on the model you have; it’s always recommendable to revise the user manual.
Final words
Use the above step by step guide to help you mount a projector on the ceiling without studs. The procedures are simple and straightforward since they are associated with fewer complications, especially if you possess some DIY skills. However, this is not the whole process, because you are supposed to mount the projector screen on the wall. But, you are at a good place to install the screen because you previously took measures and determined a suitable area to locate your projector’s screen.