If you have two turntables, such as an Audio Technica LP3 and an Audio Technica LP60, you may find it difficult to choose between the two. There are some similarities and differences between the two devices that distinguish them. Their features also make them more appealing to users. It is critical to evaluate your preferences before selecting any of the microphones.
Sure of the similarities between the two gadgets include the fact that they both have the same appearance, yet they differ somehow. In addition, one uses a dynamic microphone while the other uses a condenser microphone. The differences help the user choose the best gadget to use, especially the house users.
Consequently, the following article compares and contrasts the two devices. It also demonstrates certain commonalities, such as their benefits and drawbacks. Finally, a buying guide and FAQs for the two gadgets on which one is the best.
A quick comparison table between LP3 and LP60
|360.0 mm (14.17′′) W by 356.0 mm (14.02′′) D by 97.5 mm (3.84′′) H||Its weight is 17.2 Pounds, and the measurements are 21 by nine by 19 inches|
|completely automated||fully automatic|
|The Wow Factor
|lacks the wow effect||The wow factor is less than 0.25% and the 3KHz.|
|Not appropriate for scraping, and the item has a moving magnet.||dual magnet cartridge that improves its performance|
|read 33 and 45 RPM songs||Read 33-1/3 RPM AND A 45 RPM|
Differences between LP60 and LP3
Here are some differences between the two devices.
The LP3 weighs 17.2 Pounds, and the measurements are 21 by nine by 19 inches. In contrast, the LP120 is a somewhat more extensive version of the LP60. The LP120 is 450.0 mm 17.72 wide, 352.0 mm 13.86 deep, and 157.0 mm 6.1 tall. While the
The audio Technica LP3 is a turntable that you can operate automatically. You’ll need to automatically set the tonearm and position the needle above the song you want to play, and then lower the tonearm manually. The required will continue spinning in the inner grooves after the last song has ended until you manually lift and return the tonearm.
The LP60, on the other hand, is entirely automated. The record player keeps moving the tonearm and positions the needle where the first music starts with the press of a button. While the last song is over, the tonearm returns to the turntable. As a result, the LP60 is relatively simple to operate.
- The Wow and flutter Factor
A traitor aspect of anything that causes fans to think enormous enthusiasm or appreciation is the wow effect. The wow factor of the Audio Technica LP3 is less than 0.25% and the 3 kHz.
The LP60 is a well-designed and cheap turntable; it lacks the wow effect of its flagship model. And, to be honest, not many turntables can do that.
The Technica LP3 is the one that has a dual magnet cartridge that improves its performance. The double MM is effective in many applications that suit your desires. The Technica LP60, on the other hand, is not appropriate for scraping because it is belt driven, and scratching causes the belt to wear out and fail soon.
As a result, for the additional funds you’ll have to pay on the LP120, you’ll get a record that is applicable for various purposes. It’s not only about listening to songs. Therefore, consider the performance before choosing any of the machines.
The Technica LP60 can read 33 and 45 RPM songs, while the Technica LP3can Read 33-1/3 RPM AND 45 RPM. If you’re trying to spin 45 RPM tracks, make sure you get a thicker needle that’s made for it because they have deeper holes.
The Technica LP60, on the other hand, has a belt-drive engine. A short motor is coupled right beneath the turntable platter and links to it.
While a leather belt links a belt-drive motor to the platter, scratching needs a high engine, and the absence of a rubber belt makes it more dependable. Direct-drive is essential for turntables with user capability.
Similarities between LP60 and LP3
The similarities between the two devices include;
Depending on the manufacturer, both devices have a warranty period of 1 to 2 years.
Both machines are the most efficient and work in the same way. When you attach them to a power source, they play sounds in various locations. Both include innovative features that enhance their functionality, making them more appealing to a wide range of consumers.
Both devices are light in weight. Such a feature makes them portable from one point to another without any difficulties. The feature allows the user to move the instruments, especially the LP3 device since it is lighter.
Pros and Cons of LP60
Pros and Cons of LP3
Buying guide for both LP3 and LP60
To avoid overspending, purchase a product that is within your budget. Also, if you have the funds, consider purchasing costly but high-quality equipment.
Purchase a device that is both high-performing and of decent quality. It will endure longer because of the high quality.
Select the straight design option that best meets your needs. Consider whether utilizing a less direct mic near the noise source is better than using a cardioid from afar. For more information, look at the microphones’ decisions.
You might be interested to read also our another review of: Audio lp120 vs. Lp60
- Response to frequency
Consider how the device reacts when music is connected.
Frequently asked questions:
- Which is the most recommended gadget between LP60 and LP3?
The recommended is LP60 due to its many features, e.g., easy to set up and install, no issues when skipping songs, full automation, and comes with a built-in preamp.
Several of the technica company’s products are efficient. When purchasing one of the items, the very first item to think about is your preferences. Examine other criteria like the latest features, the price, and the device’s reliability, among others. Above everything, pay attention to the warranty coverage.
Lastly, when using the equipment, take some measures. If you don’t know how to use the equipment, check the owner’s manual. Also, consider repairing the gadget more frequently to optimize the audio quality it produces.