Audio Technica Ath m50x vs. M50-Which Is the Best

The Audio Technica ATH-M50x monitor headphones are promoted as such, but if you look at the sound quality alone, they’re like a Switchblade of audio. Because of this, it has a pretty balanced frequency response, although there is still a tiny accent on notes in the lower frequencies, which is not present in higher-end studio headphones. These headphones perform pretty well when it concerns classical music, particularly in the upper frequency where string instruments can be heard performing.

There is minimal audible masking in the reproduction of mids and highs by the ATH-M50x amplifier. Audio-Technica has achieved an incredibly accurate response and long-lasting listening comfort with the ATH-M50 studio monitor headphones for professionals in the studio. These studio phones offer a space-saving collapsible design for travel and storage, making them ideal for professional monitoring and mixing.

This article has well explained why the ath-m50 was replaced with ath-m50x. You will find the differences and similarities between the two headphones. In addition, you will find answers to some frequently asked questions and a comparison table.

Quick comparison table between Audio Technica ATH-m50x and m50

Comparison feature Audio Technica ath-m50x M-50
Impedance 380ohm 3800hm
Detachable cable Has Lacks
Weight 285g 284g
Foldable Can be folded Cannot fold
Travel bag Has a travel bag Lacks a travel bag
Frequency response 15Hz-28kHz 15Hz-28kHz
Magnet Neodymium Neodymium

Differences between Audio Technica ATH-m50x and m50audio technica ath m50x vs m50

  • Fit

The degree of snugness and sound isolation of these two pairs of headphones are the primary differences in fit. Compared to the tighter M50xBT, the wired M50x has a looser fit and hence cancels out less outside noise. The M50xBT, on the other hand, is by no means uncomfortable, and the earpads are a little softer than the M50xBT Pro.

  • Design

Both headphones have 45 mm drivers and operate in the same range of frequency of 15 – 28,000 Hz, which is the same for both models. Both headphones have similar impedance and sensitivity (38 Ohms and 99dB, respectively), but the M50x wired headphones have a higher maximum volume (up to 100dB). You should choose the classic M50x if you listen to music at a high volume regularly. Indeed, the M50xBT does not produce explosive volumes of sound, as most Wireless headphones do.

  • Lows

The wired M50x is compact and persistent in this frequency range, whereas the wired M50xBT is the chubbier. On the M50xBT, you’ll notice a fatter or more diffused bass, which lends a little more warmth to the low end of some tracks. And, particularly with acoustic bass instruments, the wired M50x does a considerably better job of expressing detail and resolve. Simply speaking, the wired M50x demonstrates unquestionably higher ability in this frequency band.

  • Mids

With somewhat recessed midranges, both headphones lighten up the instrumentation while pushing vocalists forward a little bit. The wired M50x, on the other hand, provided more information while listening to string instruments in this range. It had more excellent texture and grip than the previous model. For its part, the M50xBT sounds buoyant and airy, which is agreeable to the ear and makes for an enjoyable listening experience.

  • Highs

Both headphones have a strong presence of high-frequency frequencies. However, the standard M50x will provide you with greater detail in this range, but the M50xBT will provide you with a smoother, less detailed presentation. And, returning to pop, the crisper percussion beats on the old M50x over the mellower one are preferred. 

It has a little more snap to it. As a result of the slightly less stretched highs on the M50xBT, it is a slightly easier listening encounter in the upper registers of the audio spectrum overall. Consequently, those with sensitive ears to high frequencies may prefer the more subdued sound of the M50xBT over the M50.

  • Sound stage

In this case, there isn’t any rivalry between us. The M50x’s wired audio stage provides more space and depth. . Soundstage of wired M50x becomes more apparent once wireless M50xBT is connected via a supplied connection to wired M50x amplifiers.

Similarities between Audio Technica ATH-m50x and Audio Technica ath-m50Similarities between Audio Technica ATH-m50x and Audio Technica ath-m50

  1.  They both have a closed-back design which means that there is more comfort even in longer sessions.
  2. The motors have a diameter of 45 mm. Audio drivers transform electrical signals into sound so that you may hear them. The diameter of the driver extends to this measurement.
  3. Both are of Good sound quality; the frequency response spans 15 to 28,000 Hz and is remarkably flat; this directly impacts sound quality. In other words, less distortion equals better sound quality.
  4. A gold-plated connector, a copper-clad aluminum wire voice coil, and even a protective sleeve are included. You may connect MP3 players and pcs using the 3.5mm connector.
  5. The ear cups may be rotated 180 degrees for simple one-ear monitoring.
  6. They both have a 380-ohm impedance; higher volume is achievable because impedance reduces. Do not be alarmed by the relatively low impedance when compared to high-end headphones of comparable quality.
  7. There is no need for batteries. It’s less of a bother to charge and a lot more portable.

You might be interested to read also our another comprehensive article of:

Audio Technica Ath M20x Vs M30x

Audio Technica Ath M30x Vs M50x

 Frequently Asked Questions:

  • Is the ath-m50’s ear cup comfortable?

Answer; though primarily constructed of plastic, the headphones are incredibly durable. When worn, it is comfortable, and the ear cups will gradually get more comfortable as they become more accustomed to your ears. The ATH-M50x and M50 headphones are not without flaws, just like any other pair of headphones on the market today.


In conclusion, every review in this field states the same thing, although they may use a different word to describe the quality of the product. Without sounding harsh, the highs are accurate and detailed. Exactly where the mids should be. However, the bass is solid and deep without becoming overwhelming. With these headphones, you may listen to music for the entire day without being tired or fatigued.

While the old M50x may be the superior headset, the M50xBT is undoubtedly not a slouch either. Of course, this is an understatement, but it is also a delightful experience. When it comes to sound, you’ll have to select between the detail and clarity of the M50x as well as the light smoothness of the M50xBT, which are both excellent choices. Furthermore, if sound isolation is essential to you, the M50xBT is the model to choose.

Leave a Comment